纳米孔缺陷导致单层黑磷电荷局域极大抑制非辐射电子-空穴复合的时域模拟

通常认为缺陷加速黑磷的非辐射电子-空穴复合,阻碍器件性能的持续提高。实验打破了这一认识。采用含时密度泛函理论结合非绝热分子动力学,我们发现P-P伸缩振动驱动非辐射电子-空穴复合,使纳米孔修饰的单层黑磷的激发态寿命比完美体系延长了约5.5倍。这主要归因于三个因素。一,纳米孔结构不但没有在禁带中引入深能级缺陷,而且由于价带顶下移使带隙增加了0.22 eV。二,除了带隙增加,纳米孔减小了电子和空穴波函数重叠,并抑制了原子核热运动,从而使非绝热耦合降低至完美体系的约1/2。三,退相干时间比完美体系延长了1.5倍。前两个因素战胜了第三个因素,使纳米孔结构激发态寿命延长至2.74 ns,而其在完美体系中约为480 ps。我们的研究表明可以制造合理数量和形貌的缺陷,如纳米孔,降低黑磷非辐射电子-空穴复合,提高光电器件效率。这一研究对于理解和调控黑磷和其它二维材料的激发态性质有重要意义。     

影响高浓度氧化石墨烯分散液流变行为的重要因素及群体平衡动力学分析

氧化石墨烯(GO)片的基面和边缘上存在大量的含氧官能团,能很好地分散在水中,因而具有很好的加工性和广阔的应用前景。在较高浓度范围下,GO水分散液中存在着强烈的竞争性相互作用,从而对流变行为产生较大影响。在本文中,通过稳态、动态等流变实验以及理论分析,研究了pH值、温度和不同的有机溶剂对GO分散液流变行为的影响。结果表明,降低pH值、适当增加温度以及加入吡啶均可促进GO水分散液从粘弹性液体到凝胶态的转变。利用DLVO (Deryagin-Landau-Verwey-Overbeek)理论,探讨了GO片之间的范德华作用力以及双电层排斥作用的相互关系,及其对流变性能的影响。通过群体平衡模型(PBE)分析了GO分散液的屈服应力与体积分数的正相关关系。同时,通过蠕变和松弛实验发现,高浓度的GO分散液中结构变化及流变行为在很多方面与高聚物相似,利用Poyting-Thomson模型能较好地拟合其粘弹性行为。上述研究结果为深入研究复杂的GO分散体系提供理论支撑和实验依据。     

基于创新能力培养的化学专业本科实验教学新体系的构建与实践

课程体系是人才培养的载体。为了更好地培养拔尖创新人才,南京大学化学国家级实验教学示范中心依据化学学科的特点和发展趋势,以科学内容的内在联系和研究规律为主线构建了“化学实验基础?化学合成与表征+化学原理与测量?化学功能分子实验+化学生物学综合实验+基于项目的研究实验”实验课程新体系,按照一流课程建设要求(高阶性、创新性和挑战度)对实验教学内容进行了优化,并建立起与之相适应的实验教学平台。新课程体系综合考虑了化学一级学科的整体性和关联学科的交叉性,在南京大学化学化工学院“拔尖计划”和“强基计划”学生中实施,教学效果显著。     

氧化铜表面臭氧分解路径及表面氧物种生成机理研究

基于密度泛函理论（DFT）计算研究了O3在完整和具有氧空位的CuO(111)表面吸附的吸附位、吸附结构、吸附能和电子转移情况,比较了O3在完整表面和具有氧空位的表面分解的路径和能垒,分析了氧空位和表面吸附氧的生成机理。结果表明,在完整CuO表面,O3分子通过化学吸附或物理吸附表面结合,吸附能最高为-1.22eV（构型bri(2)）。O3在具有氧空位的CuO表面均为化学吸附,吸附能最高为-2.95eV（构型ovbri(3)）,显著高于完整表面的吸附能。O3吸附后,Cu吸附位的电荷密度减小,O3中的O原子附近的电荷密度显著增强,电荷从CuO表面转移到O3,并形成Cu-O离子键。O3分解后形成了超氧物种,提高了表面的氧化活性。在完整表面,以构型bri(2)为起始构型的路径反应能垒最低,为0.52eV;O2*在完整表面的脱附所需要的最低能量为0.42eV,形成氧空位的O2*脱附能为2.06eV。在具有氧空位的表面,O3分解的反应能垒为0.30eV（构型ovbri(1)）和0.12eV（构型ovbri(3)）,均低于完整表面的反应能垒;分解形成的O2*的最低脱附能也低于完整表面,为0.27eV。可见,氧空位的形成提高了吸附能,降低了反应能垒,使O3分子更容易吸附在CuO表面,并加快了O3的催化分解。     

Ru掺杂对Fe催化剂上酚类化合物加氢脱氧影响的密度泛函理论研究北大核心CSCD

采用密度泛函理论(DFT)计算研究了苯酚、邻甲酚、愈创木酚在不同结构Ru-Fe(211)表面上吸附活化性能和加氢脱氧反应路径.结果表明,Ru掺杂能促进H2分子在Fe(211)表面上解离,提高加氢脱氧反应速率.酚类在1Ru_(ads)-Fe(211)表面上吸附比在1Ru_(sub)-Fe(211)表面上更稳定,苯酚和邻甲酚脱羟基步骤能垒分别降低0.13和0.28 eV,有利于生成芳烃.愈创木酚在1Ru_(sub)-Fe(211)表面上加氢脱氧优势路径是先脱甲氧基生成苯酚,苯酚再加氢脱氧生成产物苯(速控步骤能垒1.16 eV);而在1Ru_(ads)-Fe(211)表面上愈创木酚先脱羟基再脱甲基生成苯酚的路径更具有动力学优势(速控步骤能垒1.21 eV).计算结果表明Ru掺杂方式影响Fe催化剂对酚反应分子的吸附稳定性以及加氢脱氧反应路径和性能.与1Ru掺杂Fe(211)催化剂相比,增加Ru原子数形成4Ru_(ads)-Fe(211),能够进一步提高酚类反应物的吸附强度,但导致加氢脱氧反应能垒升高.因此,在Fe催化剂上以表面吸附的形式掺杂少量贵金属Ru更利于酚类加氢脱氧生成芳烃.     

弹性力学的混合方程和Hamilton正则方程

本文指出,在弹性力学基本方程中,按变量分类的位移方程,应力方程以外的第三种混合方程,以及按运算子分类的微分方程、变分原理以外的第三种Hamilton方程,它们正好是对应的。本文讨论了静力的和动力的情况以及它们可能的应用。     

Phase Behavior of Methane-Pentane Mixture in Bulk and in Porous Media

The adiabatic calorimetry method is used to measure the isochoric heat capacity and the dew-bubble curves for the methane-normal pentane mixtures in bulk for three different mixture compositions of n-pentane. The near-critical behavior of the mixture heat capacity indicates that at low n-pentane concentrations, this system is close to the special point of the critical locus. The effect of porous medium has been investigated for one of the mixtures studied in bulk. It has been shown that in porous medium the essential shift of the dew-bubble curve takes place. In our opinion this shift is caused by the formation of wetting film on the surface of porous medium. The estimation of film thickness resulting from the data obtained yields the value 7–8 nm.     

Multiple Scales via Galerkin Projections: Approximate Asymptotics for Strongly Nonlinear Oscillations

The method of multiple scales and the related method of averaging are commonly used tostudy slowly modulated oscillations. If the system of interest is a slightlyperturbed harmonic oscillator, then these techniques can be applied easily. If the unperturbed system is strongly nonlinear (though possiblyconservative), then these methods can run into difficulties due to the impossibilityof carrying out required analytical operations in closed form.In this paper, we abandon the requirement of closed form analyticaltreatment at all stages. Instead, Galerkin projections are used toobtain approximate realizations of the method of multiple scales. Thispaper adapts recent work using similar ideas for approximaterealizations of the method of averaging. A key contribution of thepresent work is in the systematic identification and removal of secularterms in the general nonlinear case, a procedure that is more difficultthan for the perturbed harmonic oscillator case, and that is unnecessaryfor averaging.A strength of the present work is that the heuristics (Galerkin)and asymptotics (multiple scales) are kept distinct,leaving room for systematic refinement of the formerwithout compromising the asymptotic features of the latter.     

A network model with free-strand dynamics for polymer melts

 A network model for polymer melts is presented in which disentangled strands relax under flow conditions and may rejoin the network before complete relaxation. For simplicity, we study Gaussian strands that move affinely when incorporated in the network. Network strands are created and lost according to a time constant λ. Free strands have their dynamics given by the Bird-DeAguiar model as a crude representation of reptation and the hindered rotation experienced by polymer strands in melts. The model yields a shear-thinning viscosity with overshoot in the start-up viscosity η⁺ (t). The double-step strain results compare well with available experimental data. Received: 10 July 2000 Accepted: 10 July 2001     

Rotationally Symmetric Deformations of Partially Loaded Annular Elastic Membranes Without Wrinkling

This paper investigates axisymmetric deformations of curved annular membranes subjected to a partially vanishing vertical surface load and to radial edge loads or displacements. The frame of the membrane model we deal with is the nonlinear small-strain theory. The determination of the principal stresses reduces to the solution of a single nonlinear second order ODE. Analysis becomes explicit on the unloaded membrane part while the loaded part is treated by methods which have been previously developed. In particular, the ranges of those stress and displacement boundary data are determined which admit for wrinkle-free solutions only, i.e. for solutions governed by a nonnegative radial and circumferential stress component. For such a tensile state, a curved membrane flattens out on the unloaded portions. This revised version was published online in August 2006 with corrections to the Cover Date.